Advanced
Controls
Take full control of your Glow panel. Customise time, intensity, pulse, and modes.
Advanced
Touch Screen
Panel Controls
Your Glow panel features an advanced touchscreen interface. Tap any control to learn more.
Tap the Start/Pause button on the main screen to begin or pause your session. When the light is off, the button appears inactive. Tap once to start — the panel will illuminate and the timer will begin counting down.
Tap the timer display to enter time settings. Slide the circular dial to adjust your session duration, or toggle the timer off for continuous use. Tap OK to confirm your selection.
Tap the mode indicator at the top of the screen to choose between Red, NIR (Near-Infrared), or Blue light. Each mode targets different wavelengths for specific therapeutic benefits. Tap OK to confirm.
Tap the Dimmer area to adjust brightness levels. Use the slider or +/- buttons to control Red and NIR intensity independently. This allows you to fine-tune the power output for your comfort and treatment goals.
Tap the Pulse area to adjust frequency. Choose from preset frequencies (2.5 Hz, 4 Hz, 7 Hz, 10 Hz, 73 Hz, 146 Hz, 293 Hz, 587 Hz, 1147 Hz) or enter a custom value. Set to 0 Hz for continuous light output.
Tap ‘Add as Default Mode’ to save your current settings as a custom preset. Access saved modes via the ‘Default Mode’ button. Swipe left on any saved mode to delete it. Long press to enter the digital adjustment page for precise editing.
Connect multiple Glow panels for synchronised sessions. Press and hold the Sync button for 5 seconds to enter pairing mode. Select the device you want to pair with from the list. Both panels will operate in sync with matching settings.
Quick Modes
Presets
Access pre-configured modes for quick sessions. Each preset is optimised with the ideal wavelength, intensity, and duration settings.